Console (DSM) (CPM)(SRM) V6.55 (Date Code: Tue Sep 11 14:30:01 PDT 2018) 1. OpenSSL: 1.0.2o-fips 27 Mar 2018 (update) 2. Openssh: 7.7p1 (update) 3. Apache httpd: 2.4.33 (update) 4. RESTful Versions: v1.0, v2 (June18) (update) 5. Cell Wake-up on failure feature added 6. SANS certificate support added 7. Add power data to RESTful interface 8. Add RESTFUL port status, also add port Infor to 2.0 9. Add power data nodes to console mib for use with CPM 10. Temperature Menu consolidation under the system parameters option. 11. Invalid logins sent to syslog 12. Add SiteID, ETHO,ETH1 and CELL IP addresses and modem # to the email body 13. Separate PRIMARY and SECONDARY loss of voltage alar so that they can include customer defined info, i.e. Fuse panel info. 14. Ability to add up to 5 additional callback #’s per user ID, with the attempts per number configurable from 1 to 5 attempts 15. tftp added to the /DFW command 16. Added Wildcard certificate export/import (export private key and certificate 17. Added Radius session module timeout to Radius options 18. Added User permission to disable access to API calls 19. Added interface selection to the Ping test. You can choose to force the ping out of eth0, eth1, or cell. 20. Record the fact we upgraded the unit with new firmware in the Audit log 21. DUO Technology Radius 2FA support 22. Added DHCP ZTP support 23. Updates to SNMP include the new callback numbers (5), and Cell Wakeup on Failure Alarms 24. Updated the SNMP MIBs to include the new modem callback numbers, as well as the Cell Wakeup on Failure Alarms Obtaining Firmware Updates: The most recent updates for our Console Server Products, Switched PDU Products and Data Fallback Switch products can be by filling out the firmware request form that can be found at the following page on the WTI website: http://www.wti.com/t-firmware-upgrade.aspx Release notes for our most recent firmware updates are listed below. For older firmware updates, please contact WTI Tech Support at service@wti.com or call our toll free service line at 1-888-280-7227. Customer Service Department hours are 8 AM through 5 PM, Pacific Daylight Time. Installation: The WMU Enterprise Management Software, which is included with WTI Devices, is the preferred method for installing firmware updates on WTI devices. The WMU software allows you to manage firmware updates for multiple WTI units from a single interface. For a description of the process for managing firmware updates via the WMU, please refer to the WMU user's guide, which can be downloaded from the WTI User's Guide Archive at: http://www.wti.com/t-product-manuals.aspx Note that in order to use the WMU software, the existing firmware version for the WTI Device(s) must conform to the following standards: • Console Server Products (DSM Series, TSM Series and RSM Series): Firmware Version v6.23 or higher. • Switched PDU Products (VMR Series, NBB Series, NPS Series, RPC Series, CMM Series): Firmware Version 1.48 or higher. • Data Fallback Switch Products (AFS Series): Firmware Version 2.30 When upgrading older units that are running firmware versions that are earlier than the standards listed above, it is recommended to use the WTI Firmware Upgrade Utility. A zip file that contains the installation files and other documentation for the WTI Firmware Upgrade Utility can be downloaded from WTI's FTP server, located at: ftp://wtiftp.wti.com/pub/TechSupport/Firmware/Upgrade_Utility/ Please refer to the documentation included in the zip file for further instructions. In addition to the WMU and WTI Firmware Upgrade Utility, the /UF command can also be used to install firmware upgrades. For more information on the /UF command, please refer to the user’s guide for your WTI device.