ARM Console V6.62 (Date Code Mon Dec 14 16:48:57 PST 2020) 1. OpenSSL: 1.0.2u-fips 20 Dec 2019 2. Openssh: 8.1p1 3. Apache httpd: 2.4.39 4. IPSec: 5.9.0/K3.14.43-g875c69b 5. OpenVPN: 2.4.7 6. bash: 5.0.0(1)-release 7. RESTful Versions: v1.0, v2 (Nov 20) 8. Added option to "/I" command to set unit to "Factory Default" (Sanitize the unit). 9. Cell ipV6 support added 10. Add command (in /CELL -> 6 "Refresh Parameters") to abort cell modem reset sequence. 11. Support for T-Mobile added to cell modem carrier option 12. LCP strings added to Cell PPP connection test. If PPP connection is not detected, code will restart PPP connection sequence. 13. User access based on defined privilege options added to TACACS authentication 14. Syslog Server collection point on box 15. Syslog / Alert severity levels 16. Syslog TCP/UDP option 17. Syslog TCP SSL/TSL support added 18. Syslog SPLUNK support added 19. Webhooks support Added 20. Update Bash, StrongSwan, OpenVPN 21. Add the strongSwan version and ARM version to our product status display 22. Add MAC addresses to /J 23. Added support for firmware upgrade via API 24. Corrected issue with SNMP Time being reset when any system services were restarted. 25. TACACS option now has support for Account management module, Service Name and debug. 26. TLS support added to email option 27. Telemetry support added as a hidden menu (/TEL). 28. Application version information was removed from the /J* command. Application version information now listed under the “/show version details” hidden command 29. API support for the following additions: snmptrap, snmpaccess, iptables, syslogserver, syslogclient 30. Added hidden command “/show version details” Obtaining Firmware Updates: The most recent updates for our Console Server, Switched PDU and Data Fallback products can be found by visiting https://www.wti.com/pages/software For older firmware updates, please contact WTI Tech Support at service@wti.com, call our toll free service line at 1-888-280-7227, live chat or fill out a software request form at https://www.wti.com/pages/software Customer Service Department hours are 8 AM through 5 PM, Pacific Daylight Time. Installation: WTI Centralized Management Software (WMU), is the preferred method for installing firmware updates on WTI devices. The WMU software allows you to manage firmware updates for multiple WTI units from a single interface. For a description of the process for managing firmware updates via the WMU, please refer to the WMU user's guide, which can be downloaded from the WTI User's Guide Archive at: https://www.wti.com/pages/manuals-documentation Note that in order to use the WMU software, the existing firmware version for the WTI Device(s) must conform to the following standards: • Console Server Products (DSM, CPM, REM, TSM and RSM Series): Firmware Version v6.23 or higher. • Switched PDU Products (VMR, NBB, NPS, RPC and CCM Series): Firmware Version 1.48 or higher. • Data Fallback Switch Products (AFS Series): Firmware Version 2.30 When upgrading older units that are running firmware versions that are earlier than the standards listed above, it is recommended to use the WTI Firmware Upgrade Utility. A zip file that contains the installation files and other documentation for the WTI Firmware Upgrade Utility can be downloaded from WTI's FTP server, located at: https://ftp.wti.com/pub/TechSupport/Firmware/Upgrade_Utility/ Please refer to the documentation included in the zip file for further instructions. In addition to the WMU and WTI Firmware Upgrade Utility, the /UF command can also be used to install firmware upgrades. For more information on the /UF command, please refer to the user’s guide for your WTI device.