ARM Console V8.06 (Tue Oct  1 14:21:32 PDT 2024)
1.	OpenSSL: 3.0.13 30 Jan 2024 (Library: OpenSSL 3.0.13 30 Jan 2024)   
2.	OpenSSH: 9.8p1    
3.	Apache:  2.4.59   
4.	IPSec:  5.9.8/K5.4.0    
5.	OpenVPN: 2.5.7    
6.	Bash: 5.0.0(1)-release      
7.	RESTful:  v1.0, v2 (Dec24)  
8.	IPSec Version: 5.9.8/K5.4.0	
9.	NET-SNMP Version:	 5.9.1
10.	New wake on failure feature introduces Single Ping option
11.	Fixed issue for wake on failure not displaying ping results correctly via WEB GUI
12.	New Alarm added for Cell User Login/Logout
13.	Fixed issue for SNMP where a failure could occur over an extended period of time
14.	Fixed issue for TACACS that affected the default user access
15.	APN for the Global USB modem now supports username and login
16.	VPN tunnels now support Web access 
17.	Fixed issue for LDAP that restricted changing certain fields via the WEB GUI



Obtaining Firmware Updates:

The most recent updates for our Console Server, Switched PDU and Data Fallback products can be found by visiting https://www.wti.com/pages/software

For older firmware updates, please contact WTI Tech Support at service@wti.com, call our toll free service line at 1-888-280-7227, live chat or fill out a software request form at https://www.wti.com/pages/software

Customer Service Department hours are 8 AM through 5 PM, Pacific Daylight Time.



Installation:

NetReach Centralized Management Software (NetReach), is the preferred method for installing firmware updates on WTI devices.  The NetReach software allows you to manage firmware updates for multiple WTI units from a single interface. 

For a description of the process for managing firmware updates via the NetReach, please refer to the NetReach user's guide, which can be downloaded from the WTI User's Guide Archive at:

https://www.wti.com/pages/manuals-documentation

Note that in order to use the NetReach software, the existing firmware version for the WTI Device(s) must conform to the following standards:

•	Console Server Products (DSM, CPM, and REM Series):  Firmware Version 7.04 or higher.  
•	Switched PDU Products (VMR, NBB, NPS and RPC):  Firmware Version 3.03 or higher.

When upgrading older units that are running firmware versions that are earlier than the standards listed above, it is recommended to use the WTI Centralized Management Software (WMU).  The WMU can be downloaded from WTI's FTP server, located at:

https://www.wti.com/products/wmu-centralized-management-software

Please refer to the WMU user's guide for further instructions.

In addition to the NetReach and WMU, the /UF command can also be used to install firmware upgrades.  For more information on the /UF command, please refer to the user’s guide for your WTI device.